Autofocus is faster, and lighting brightness and the measured sections can be changed in settings.
Update · Software · IntScan Pro · Version 10.0.0 · Posted November 15, 2026
IntScan Pro is an AI defect inspection program for line-scan cameras, which capture a moving material one line at a time. It captures materials that flow without stopping, such as paper, film, metal and textiles, in real time and decides OK/NG by the inspection settings you set.
Main features
Captures without stopping: the camera shoots in step with the distance the material has moved, so the moving material is seen in real time.
Judged by your settings: it finds defects and decides OK/NG by the inspection settings (recipe) set in advance.
Records: results, work logs and images are kept together.
One to five cameras: several line-scan cameras work at the same time.
What changed this time
IntScan Pro 10.0.0 brings the following changes. Which items apply depends on how your equipment is set up.
Faster autofocus: the wait at the start is shorter, and autofocus takes fewer back-and-forth passes to find focus.
Lighting brightness setting: lighting brightness is changed in the settings file.
Skip the first section: a new setting leaves the first section out of the measurement. The default is the same as before.
Version shown: the program file information shows version 10.0.0.
Fixed
The Stop button could not be pressed during inspection. This is fixed.
When you need the update
Tell us through Contact Us at the top of the screen.